Habitation Only Service


Bodywork Exterior 

Check condition and security of body panels 

Check operation of door locks, catches and hinges and lubricate

Check condition and security of all trims, inserts and sealants

Check windows and seals for damage

Check condition and security of grab handles 

Check security of body attachments (ladders, aerials, cycle racks etc)


Bodywork Interior 

Damp meter test ( see attached report )

Check floor for delamination

Check operation of cupboard hinges, catches, locks and stays 

Check operation and condition of all window catches, stays and seals

Check operation and security of all skylights 

Check operation of blinds and fly screens. Adjust if required

Check fixed ventilation openings for free flow of air


Water System and Appliances

Check operation and condition of water pump

Check operation of pressure switch and adjust if required

Check condition of water filter  and housing (replace filter if required)

Check operation of taps and shower fittings (including external taps if fitted)

Check overall condition of fresh and waste water pipes and fittings

Check toilet for operation and condition of seal, blade and flush

Check drain plugs for seal and operation ( Drain down system )


Gas Supply and Appliances

Fridge not serviced unless requested

Check regulator performance and carry out leak test

Check condition and date of flexible hose

Check condition and security of all pipe work

Check condition of LPG sticker on locker and security of gas bottles

Check gas dispersal holes for obstructions

Check fridge ignition, FFD and cooling 

Check operation of cooker, hob and oven. Ignition, flame and FFD

Check operation of space heater. Ignition, flame, FFD and CO room test

Check operation of water heater. Ignition, flame, FFD and heating

Check operation and condition of external gas point if fitted


Electrical Systems 240v

Check condition of inlet plug and hook up cable (when available)

Operation of RCD, MCB’s and earth bonding

Check condition of wiring, sockets and fixed connections

Check operation of battery charger

Check mains operation of fridge 

Check mains operation of cooker and hob

Check mains operation of water heater

Check mains operation of space heater


Electrical Systems 12v

Check condition of 12N and 12S plugs and cables

Check condition and operation of road lights and reflectors

Check condition of wiring, sockets and fuses

Check functions of 12S system ( charging, fridge, lights etc)

Check operation of battery charger

Check condition of battery. Clean and lubricate terminals 

Check operation of all 12v lights including awning light

Check blown air system


Fire and safety

Check condition of security, smoke and carbon monoxide alarms

Check condition, type and expiry date of fire extinguisher 

Check condition and location of fire blanket

Check operation, function and safety of DIY additions



 
 

Chassis Only Service


Chassis and Running Gear

Check coupling head and safety catch for wear and lubricate if required

Check and clean pads on ball acting stabiliser

Check condition and routing of breakaway cable and clip

Check operation of overrun piston and lubricate

Check operation of jockey wheel clean and lubricate

Check operation of handbrake and lubricate

Check brake rods, cables and supports

Remove wheels and check tyres for wear, damage, age and pressure

Remove brake drums check bearings, seals and linings. Clean and lubricate

Replace drum with new split pin or one shot nut and torque as required

Adjust brakes at drum and check free play in the linkage and at handbrake

Replace road wheels and torque wheel nuts / bolts to manufacturers settings

Check condition and security of chassis and attachment to body

Check operation of suspension assemblies

Check corner steadies operation and lubricate

Check spare wheel carrier and folding step for operation and lubricate

Gas Supply

Check regulator performance and carry out leak test

Check condition and date of flexible hose

Check condition of LPG sticker on locker and security of gas bottles


Full Service Includes habitation and chassis.


Pre purchase Inspections

This will involve a full damp check with report for the customer to keep.

and a general check over to see that all the appliances and fittings are functioning.


General repairs

Over seals / Reseals

Replacement windows, doors and rooflights

Delamination repairs


Motor movers

Supply and fitting on single and twin wheel vans

Repairs to existing movers

Removal of existing movers